How To Clean A Tanning Bed? 5 Easy Ways!

Are you wondering how to clean a tanning bed? Well, you will know as you read further, my friends.

Of course, if a certain product is made especially for cleaning your tanning bed, then it’s probably the best than any other product.

This cleaner should serve not only as a cleaning agent but as a sanitizing one as well.

Anyway, other products are not specifically made for tanning beds yet can be used for such purposes because they have these important agents.

My friends, there are many things that you should consider when opting for a certain cleaning agent to clean a tanning bed.

Without further ado, let’s start!


Ways To Clean A Tanning Bed

There are many ways on how to clean a tanning bed.

Here are the following:


#1. Choosing a cleaning agent made especially for tanning beds

The first thing you should keep in mind is prioritizing a product made for a tanning bed.

It should help in preventing build-up responsible for blocking UV rays.

Well, not all cleaners do.

So, it’s best to opt for one that won’t block rays, whether UVA or UVB, for your tanning beds.

Usually, you will find these products pre-mixed.

Anyway, there are DIY mixes, so you have a wide range of discretion.

Sometimes, it is bought as cleaning kits, so it will depend on what’s available to your nearest hardware.

Perhaps, the best thing that you should do is to check the instruction manual of the bed.

In doing so, you’re sure to clean all the parts of the tanning bed in a breeze.


#2. Cleaning and sanitizing it regularly

My friends, the cleaner you have should not only clean the bed.

It’s not enough! Given the circumstances nowadays, it’s important to sanitize and disinfect it.

Just come to imagine how many bodies are using it.

Not to mention the sweat, the hair, and other bodily fluids that might stay on the surface.

Of course, using the bed means you’re using a tanning lotion.

To avoid the build-up of these things, you would need to clean them.

And cleaning should be made regularly- every after your tanning session.

Be it noted, however, that not all tanning beds are alike.

The best thing that you should do is clean and sanitize the contaminated part and get touched.

Without a doubt, it gets dirty after you use it, so then again, cleaning be made.


#3. Opting for a cleaning agent with sanitizing and disinfecting properties

Aside from the fact that it’s made especially for your tanning beds, it’s also important that it’s composed of sanitizing and disinfecting properties.

My friends, the effectiveness of this kind of cleaning agent is different compared to that solution you just made out of water and soap.

It’s not enough!

What’s more, is that it can even be detrimental to your tanning bed.

Such a solution won’t be okay for the acrylic parts.

Yes, some people would use solutions made of water and vinegar.

But then, I tell you that it’s damaging to the device.

And you don’t want that to happen. So I can’t imagine how much it cost to end up damaged.

Anyway, you may find separate products specifically for cleaning and sanitizing.

However, the best thing you do is choose one that is already composed of a cleaner and sanitizer- 2-in-1.


#4. More reasons to opt for a bed tanning cleaning agent

Then again, make sure that you choose one that is made for your tanning bed.

A typical cleaner may clean it, but it might be damaging to the acrylic of your bed if it’s for your bathroom or kitchen.

My friends, there’s more reason why you should choose a tanning bed cleaner.

After cleaning your bed, you may think that it’s already okay for you to use it.

There are cases, however, that the cleaner may remain on the surface.

And if that happens, it will absorb into your body.

The good news about using a tanning bed cleaner is that it prevents this risk.

So, if I were you, I will follow this process.


#5. Which one to get?

DIY cleaner requires you to mix it with water.

And it usually lasts a little longer than the pre-mixed.

That’s why it’s ideal to use if you have a tanning salon.

If you’re a salon owner, then it’s best to get one in bulk.

Also, it gets more affordable as you buy wholesale.

On the other hand, if it’s merely for personal use, I suggest you get a cleaner that’s already pre-mixed.

Yes, it may be more costly compared to the DIY solution.

I guess you still can save because you’ll not be using it much more often.


It’s A Wrap!

When you’re buying a cleaning agent for your tanning bed, you should also think about the other parts you need to get cleaned.

It’s not only the inside that you will be cleaning.

That’s why it’s best to get a flexible cleaning agent, ideal for all of these parts.

Now, you already know the ways on how to clean a tanning bed.

That’s all there is!

Enjoy your day.

Leave a Comment