How To Clean A Carburetor On A Pressure Washer? 5 Easy Steps!

How to clean a carburetor on a pressure washer? Cleaning a carburetor requires a lot of steps like removing its parts one by one, applying cleaners, assembling the parts, taking out the components, and many more to accomplish it to leave your machine nice and thoroughly cleaned up.

But how do we achieve this kind of task? We’ll teach you the ways to do it. This is a good guide for you if you are new to cleaning one for starters. Why? We will make it easy and understandable for you to not hassle the process to carry this out.

how to clean a carburetor on a pressure washer

Remember, when dealing with carburetors, fuel valves should be first removed, and you should empty their tank before you start to clean it.

Now that you have all the information needed to know how you can clean a carburetor on a pressure washer, it is now time that we start carrying out this process. It would be best to keep these in mind to know right and wrong when doing the procedure. Also, keep in mind the necessary precautions to start cleaning one.


Steps To Clean Your Carburettor On A Pressure Washer

How to clean a carburetor on a pressure washer? Before cleaning a carburetor, you must know the basics and adequately understand its exact use and why it is essential to your pressure washer. Once you have learned the basics, it will help you know better how to do the process:


Step #1. Accessing the carburetor of your pressure washer

Before you can access the carburetor of a pressure washer, you must first turn off its fuel valve, or else, water will continue to flow throughout the process, leading to waste.

You would rather have to remove the spark plug cap to expose the fuel valve to do this. Now that it is open, turn the valve off. Why is it essential to turn it off beforehand? As their name states, fuel valves are the way for the fuel to go through.

So, if you turn it off, no power can pass through the carburetor that can cause accidents, or even start a flame if you mishandle it without any precautions. That is why it is essential to learn about the basics of it. With the fuel valves turned off, we will now locate the carburetor. It is big, so you can see it once you have opened the insides of the machine pressure washer. To get to the carburetor, you’ll probably need to remove the throttle cover, the intake arrangement, and the air filter box. With those things removed from the machine, you also have access to the insides and carburetor. Once everything is done, we can now move on to the next step of the process, which we will discuss in a short while.


Step #2. Emptying the gas tank

For the second step, there should be a gas line that can be seen when you have exposed the internal systems of the machine. From there on, a gas line can be seen connected to the carburetor and the fuel tank.

You will want to empty the gas from its storage and take out both the nipple and tubes.

Once the gas lines and the tank are emptied, there may still be residuals coming from the machine. So, prepare an old towel, cloth, or bowl to catch the dripping gas so that it won’t be a mess if you clean after the process has been carried out. It may be sticky and cause accidents in case you have something flammable with you.


Step #3. Removal of the carburetor

Some screws may hold the unit to hold it in place tightly. Using a nut driver or a screwdriver, you’ll want to remove it from the washer’s engine. It may be tight so make sure to pour some oil if needed to make the sockets lose and easier to remove. Finally, disconnect the throttle cable that is linked to the carburetor. Learn more on how to clean a carburetor on your pressure washer as you read on. 


Step #4. Taking apart of the carburetor

Now that the carburetor has been removed, it is time to take it apart. To do that, to remove the bowl, start by unscrewing the bottom of the unit. Whether you’re using a home pressure washer or one of the most significant professional pressure washers, this motion will reveal the float of your pressure washer.


Step #5. Finalizations and cleaning

Dirt may be left in the machine, so with that, spray some carburetor cleaner to remove the land from the parts that require cleaning.

Please do not use it on rubber as it may damage the material. Once everything has been cleaned up, reconnect all the details and put them back together to use your machine again. And that’s it! Before we end, you might also want to read related articles on how to wash a car with a pressure washer.


It’s A Wrap!

How to clean a carburetor on a pressure washer? With your carburetor all cleaned up, it is now time to put it to use without the worries of it being dirtied. If ever that happens, you can still use this as a reference to know thoroughly how you can clean a carburetor on a pressure washer. If you are interested in similar topics, we have other options that you may want to check out when you have free time. You may also read this article on how to clean siding without a pressure washer.

Leave a Comment