How To Change A Wick On A Corona Kerosene Heater? 3 Easy Steps!

Do you want to learn how to change a wick on a Corona kerosene heater? Before changing the wick of a kerosene heater, the first thing to do is to dry all the fuel inside by using it. Then you can begin the disassembly process, which will allow you to see and gain access to the kerosene wick. Next, replace the old wick with a new one. After appropriately changing the wick and testing it, you can proceed by assembling the kerosene heater the same way you disassembled it.

Kerosene heaters have their advantages and disadvantages. These heaters are convenient in the right situation. In this article, we will be going over the step-by-step process of changing the wick on a Corona kerosene heater.

The specific way to do it will vary depending on the brand and model of the kerosene heater. This guide describes the steps in a general sense, which means these can be used for kerosene heaters of other brands. To learn more about this, keep on reading. 

 

What Is A Kerosene Heater

First of all, let us go over the basics of a kerosene heater. A kerosene heater is a device that provides heat to the surrounding area wherever it is placed and is similar to how a kerosene lamp would function. This heater works by gasifying the kerosene in its tank with the help of its wick and then burning the gas in the combustion area to produce heat. Because of capillary action, the fuel 1-K kerosene goes up into the combustion area via the wick. 

Take note that there should always be a supply of fresh air when using a kerosene heater. Do not use the heater in a room where airflow is limited. The kerosene heater needs a generous supply of oxygen. Using it in an air-tight space or room can put you at risk of suffocation. The heater can also give off a weird odor when it is first started, caused by the kerosene in the air that hasn’t been burned. A tactic that kerosene heater owners use is to use the heater outdoors first until the odor is gone and use it where they intend to.

Now that we know all about the basics let’s get to the purpose of this guide. Kerosene heaters also need maintenance after a set amount of time. The method usually depends on the type of material the wicks used. Fiberglass wick kerosene heaters must be used until the fuel runs out to burn off the deposits. The frequency of maintenance can vary depending on how often it is used. On the other hand, cotton wick kerosene heaters are maintained by wiping residue off the top of the wick. To know how to change a wick on a Corona kerosene heater, continue reading until the end.

 

Steps To Change A Wick On A Corona Kerosene Heater

The wick on your Corona kerosene heater is changed depending on its condition. Its condition is dependent on how often you use your heater. You should check and examine the wick at least once a month. The exact process of changing the wick will slightly vary depending on the specific model of your Corona kerosene heater. The steps provided, however, will apply to other models and brands. Before starting, make sure that you know your heater or have at least read the owner’s manual once. Ensure that your new wick is compatible.

 

Step #1. Disassembling the heater

Before taking apart the heater, ensure that you have burned the fuel dry outdoors. Once there is no fuel left, you can start taking apart the heater. The exact process depends on the model of your Corona heater. The disassembly process will be more straightforward if the owner’s manual is used as a reference. Make sure you are gentle with the parts, as some are easily damaged, like the catalytic converter.

 

Step #2. Installing the wick

After the wick has been revealed and its screws removed, you can mark the position of the old wick before removing it. The next step is to insert the new wick in the same depth as the old one. You can insert the wick by folding it to work on one side first and carefully release it so that it becomes whole. Ensure that it is firmly attached to the teeth at the holder’s sides. You may also be interested to know about common kerosene heater problems.

 

Step #3. Reassembling the heater

When reassembling the heater, it is wise to test the wick first by only attaching the wick adjuster first. If the wick is attached and moving correctly, you can proceed to assemble the rest of the heater. This step is done so that you won’t have to disassemble the whole thing again if you are dissatisfied with how the wick moves. Just put everything back in the opposite order that you took them out. Make sure that everything is snug and fit. Did you use the proper tools for this?

 

It’s A Wrap!

Congratulations on reaching the end of this article! We hope that your questions about how to change a wick on a Corona kerosene heater have been answered. The time and effort you have spent reading this guide are very much appreciated.

Now you know how to replace the wick of your kerosene heater safely and efficiently. Remember always to stay safe and follow the proper safety guidelines, especially when dealing with heating appliances. House fires and other hazards are prevented by learning what causes them. Thank you for trusting us. We look forward to helping you again in the future. Take care. You may also want to read about how to vent a kerosene heater and which is safer kerosene and propane heater.

Leave a Comment