Have your curiosity led you to think, “how to build a Japanese platform bed?”
If yes, then that might be the reason why you’re here!
Regardless, platform beds rose to popularity because of their clean design and contemporary look.
Beds provide comfort to our tired bodies, making them the essential piece of furniture in the house.
But, buying an already made bed can be costly and burdensome to transport and place in your home.
Building your bed can be a good way to save money, and it gives you total freedom on the design, size, and price.
Furthermore, if you want to change an old bed into an elegant and minimalist bed, this article will help you.
So read on!
Steps To Build A Japanese Platform Bed
Believe it or not, some Japanese platform beds can be built with economically priced tools and can be done in one weekend.
Additionally, it does not require any special skills or specialized tools.
The platform bed does not utilize any hardware to set up or take down since it uses Japanese joinery to hold the bed together.
On the other hand, building a complex bed can be difficult and can’t be done by every person.
And you don’t want a bed that will fall apart after a month’s.
So, we looked up how to build a Japanese platform bed anyone can do quickly.
And here they are:
Step #1. Collect materials
Materials needed to build a platform bed are here in this article.
These materials can be easily found in hardware stores and are not that expensive.
Building a platform bed will cost from $50 to a little bit above $200.
You can use other materials and substitute them if your budget does not agree with the materials listed in the article.
Metal or wood can be used as a foundation for beds, so it’s your choice which way to go.
Platform beds don’t need any additional support or bed springs which can reduce the cost of materials.
Remember to buy materials within your budget range; you can use many budget-wise materials to replace unaffordable materials listed in the article.
Step#2. Bed posts
Bed posts are the stand or the foundation of the bed.
Therefore, making them sturdy is the utmost priority.
Using 2×2 for the outer corners, then 1×2 and 1×5 for the inside of the post.
That will allow it to have a somewhat puzzle at the top that can fit the bed rails.
It will make it very sturdy since it is extensive and it is not very frail.
Using this method will give it the sturdiness needed to hold the bed together and hold any action to do in the bed.
Wood glue is needed to hold the pieces together.
Make sure to clamp it tightly so that it does not loosen after a couple of months.
Step#3. Bed rails
Making a bed rail is very challenging, but it is not impossible.
First, mark the part of the bed rails that you will place a hole.
You need to place two on each rail.
It’s ok if it’s not perfect or if it is not beautiful because they are hidden, make sure they fit perfectly.
Interlocking bed rails are sturdier instead of using wood glue to stick them together because they won’t waver for a very long time.
Step#4. Trims and mattress supports
When placing the trims, you can use wood glue, or if you want to join the rails and trims with something sturdier, you can use wood screws.
As for cutting your bed trims, make sure that your cut is as close as possible to the bedpost but does not overlap with it.
And when attaching your trims with wood glue, make sure you clamp it so that the glue can dry properly and become sturdy.
Bed trims are attached to the bed rails horizontally, so it should look like a very long “T.”
Step #5. Center support
Make sure the center support of the bed is sturdy and frail.
Then, you can put a stand that interlocks.
Also, make sure to glue and clamp your center support to the bed rails so that they can be appropriately attached.
The support can be glued to the center support than reinforced with wood screws, but it seems unnecessary.
But if you want to use wood screws, make sure to pre-drill the holes.
When using wood glue, always make sure to clamp the wood at a sufficient amount of time to harden.
Step #6. Headboard
Use a somewhat thick and wide piece of wood to use as your headboard.
It can be attached using wood glue.
Make sure to place back supports to your headboard to help it stay still.
Step #7 Final assembly
Place mattress support slats across the center support.
Make sure your supports can handle your weight and your mattress.
Enforce them properly and make them as sturdy as possible and make sure its does not squeak.
Wrapping Up
And that is all the information we gathered regarding our topic, “how to build a Japanese platform bed?”
Remember to find the materials within your budget range and enforce the wood slats properly!
Do you want to read more?
Then this article might interest you.
Nevertheless, thank you for stopping by!