How To Attach Headboard To Flex Fit Adjustable Bed Frame? 7 Easy Steps!

How to attach headboard to Flex Fit adjustable bed frame? This article will give you tips and tricks regarding that!

First, you should know what a Flex Fit adjustable bed frame is.

how to attach headboard to Flex Fit adjustable bed frame

Well, it  features a clever flexible foundation that enables you to lift your head without moving nor doing anything.

In short, it is a bed frame that uses the help of our modern technology, and a controller or your smartphone usually controls it.

These adjustable beds are usually expensive; they cost around $1000-$3000 per bed frame, depending on the size.

Its smallest size is twin long, and its largest is a flex top California king.

Flex Fit adjustable bed frames are one of the convenient and comfortable bed frames for a good rest.

If you can afford one, I recommend you to buy one.

Do you want to know more about Flex Fit adjustable bed frames and how to attach their headboard?

Keep on reading and scrolling!

 

Steps To Attach Headboard To Flex Fit Adjustable Bed Frame

Here are the steps on how to attach headboard to Flex Fit adjustable bed frame:

 

Step #1. Incline the head of your bed frame

To do this action, you need to get your remote control or smartphone.

Go to its setting and adjust the head to make it in an inclined position.

As you made your desired arrangement, you are now ready for the next step.

 

Step #2. Look for the headboard bracket in the adjustable frame

Not all adjustable bed frame has a headboard bracket attached in it.

The first step is to check to see whether your adjustable frame already has headboard brackets installed.

It doesn’t imply you can’t use a headboard if your mattress may not have a headboard bracket.

It just clearly means that you must buy a headboard bracket set that is suitable for your mattress.

This information is generally found in the adjustable bed’s instructions or by contacting the product’s customer service.

A usual and typical headboard bracket set/kit comes with the following: washer, bolts, nuts, and bracket channels.

 

Step#3. Examine the way the headboard is attached

Now, you’ve got a headboard bracket on your wall.

You should also determine what type of headboard bracket it is.

There are two types of designs: bolt-on and hook-on.

Drilled holes are present in a bolt-on bracket.

Hooks are placed in specified positions on a hook-on bracket.

The standard bracket allows you to attach it to the headboard by passing a bolt through the hole.

On the other hand, the diameter of the hole affects the bolt size required for a secure connection.

 

Step#4. Set up your space

Make sure that your bed space is comfortable and wide.

You cannot work and attach your headboard well if your workplace is not suitable for working.

Ensure that your bed frame could be inclined in your area.

Also, don’t forget to place your tools beside you before working.

 

Step#5. Secure the brackets on the bed frame

Attach the headboard brackets flange to the bracket channels.

Next, secure the headboard bracket channels to the adjustable bed frame.

Adjust the brackets to a distance of one and a half to two inches from the bed’s edge.

It allows the mattress to have enough clearance to avoid rubbing against the headboard when the adjustable base rotates.

Using a wrench, tighten the bolts to secure the brackets and flanges.

Locate the two slot holes at the corner of the base frame’s head-end.

The next thing to do is to place the bracket of the headboard underneath the frame’s base and against the base’s head-end.

Also, you should place the carriage bolt in such a way that it passes through the base frame’s inner slot hole.

Utilize two one-inch hex bolts and nuts to attach the headboard bracket flange weldment.

Instead of the headboard bracket weldment through the holes and slots.

Carry on with the second bracket construction in the same manner.

Once you’ve got both headboard assemblies in place, you can move on to the next step!

 

Step#6. Calculate the holes’ measurement for mounting

After the brackets are in place, calculate the length between the mounting holes on the struts of the bed frame.

Next, measure the distance between the slots that serve as mounting holes for the headboard flanges.

 

Step#7. Attach the headboard

Stick the bolts via the holes in the headboard to fasten them once you’ve matched up the holes with the brackets.

Then, to keep the headboard in place, tighten these bolts.

Then, don’t forget to put back the head of the bed in a flat position.

 

Conclusion

How to attach headboard to Flex Fit adjustable bed frame?

Flex Fix adjustable beds are not that hard to attach with a new headboard.

You need to remember some steps and learn how to do them.

You only need four things to attach to the headboard- they are washers, bolts, nuts, and bracket channels.

Without these items, you will not be able to put the headboard in your adjustable bed frame successfully.

These beds are expensive.

But it can help you achieve the best sleeping position.

So, when it comes to comfort, adjustable beds are the best.

I hope you learned something!

Leave a Comment