Are you wondering how to assemble a sleep number bed?
Read through, so you will know-how.
Once you’ve got your sleep number bed, you’ll be surprised that it comes in multiple boxes.
And that means you still need to assemble the bed by yourself.
The good news is that assembling it is a breeze.
In no time, I’m sure you can relax and rest.
It takes only half an hour to finish, so let’s start!
Steps To Assemble A Sleep Number Bed
So, how to assemble a sleep number bed?
Here are the steps to do so:
Step #1. Assembling the base
Here’s the thing:
These beds have durable bases, usually made of plastic.
And these bases are alternatives to your typical box springs.
My friends, all you need to do is to set the bases on the ground.
You can do so if the headboard you have doesn’t come with a bed frame.
Make sure not to place the base above the box spring.
Well, the pieces that come into the package are surely easy to assemble; and they lock together.
Most likely, it comes with 6 support beams, 2 side rails, and 4 deck panels if you have a queen bed.
Every side comes with labels, A and B.
Sides A and B will be joint together, and you’ll hear them click.
In order for you to make sure that they’re secured, get the pins and use these to keep them in place.
Now, you already have two rails that are free-standing.
The next thing that you should do is to install your support beams.
You should slide one of the support beams into the side rail’s edge.
Begin with the bed’s head.
Make sure that the tabs you find on the support beams point up.
Yes, the joints may be snugging; but then, it must be sliding without much effort at all.
Do the same process for the other support beams; just place them in the slots, my friends.
The side rails and the support beams should be flushing above and below.
Step #2. Putting in place the firmness control system
Are you wondering what a firmness control system is?
It’s an apparatus employed to inflate the two chambers of the bed; it’s important that it’s situated inside the base’s initial part.
In order for it to work properly, it should be situated on top of the base, where the legs of the bed would be.
To ensure your safety, it should be plugged into a surge protector.
Then, you’ll have to attach the deck panels.
When you’ve finished sliding down the frame, they’ll latch into place.
In creating a solid, level the foundation of your sleep number bed, all of these components must interlock.
Much more, you’ll need to buy mounting brackets if you wish to attach your headboard to the base.
In order for you to attach the brackets from the base to your headboard, you’ll also need to acquire modular base legs.
Finally, you will need to put on the fitted sheet, which is similar to a comforter.
Now, it’s time to give your bed a finishing touch, just cover the base.
Step #3. Assembling the bed
Here comes the best part of this process.
Now, you can put the cover of your mattress above the base.
See to it that the holes made for the pump hoses are placed up the bed.
The next step is to put in the wide, lengthy foam pieces.
For the size of the bed, the two long sections will be very long, while the two shorter parts will be in the middle.
Every notch will slide into the next section, but make sure to keep the pieces unlocked.
The foam pieces on the edges of the bed stabilize it.
Congratulations, you are now sure to bring the foam base.
This should fit into the existing space seen between foam sides, without flopping around.
With both air hose attachments toward the foot of the bed, place the air chambers on top.
Step #4. Turning the pressure to 100
Before hooking up the firmness control system and inflating the air chambers, turn the pressure up to 100.
Now that the hoses are attached to the air chambers, it’s time to hook them up to the suction device.
Well, the left hose is marked “L,” which you can find through the aperture on the left side of the bed cover.
You should make sure to connect it to the left side of the air chamber
To ensure that you connect the left hose, connect the hose marked “L” to the aperture on the left side of the mattress cover.
When you hear a click, push the hose into the chamber.
For extra measure, repeat this on the right side.
You will be able to inflate the air chamber using the remote control that comes with the package.
In order for you to fill both chambers, it’s time for pressing and holding the “fill” button.
You will be prompted to modify the bed after the setup process is completed.
Step #5. Putting the comfort pad and pillow top
Now, it’s time for inflating the air chambers.
You can then lay the pillow top or duvet cover above the inflated chambers.
Then, you should be connecting the pieces; close the zippers to do so.
The top zipper should then be undone, followed by the duvet cover.
It is important to let the foam comfort pads face up.
At long last, zip the duvet cover as tight as possible and then add the border to the entire cover.
It’s A Wrap!
That’s all there is, my friends.
You now know how to assemble a sleep number bed.
I hope you will enjoy your bed.
Until here, my friends.
Have a good night of sleep!