The desire to decorate our rooms with quality fabric has been on the increase. This is why homeowners have continuously requested the services of internal decorators who would combine various designs and shapes to bring out the best of beauty and attraction in well-made curtains.
How many yards of fabric to make curtains is the next question to come to mind. You can not sew clothes for yourself without proper measurement of the fabric’s length and width to be used.
In the same manner, one should measure and know how many yards of fabric to make curtains.
A nice measurement is a gateway to having great decor in the room. This measurement gives balance to both curtains and the curtain rod, irrespective of the preferred design of the curtain in the room. It also makes the job of fixing curtains to the wall go faster than expected.
How to Calculate how Many Yards of Fabric to Make Curtains
The procedures to properly calculate how many yards of fabric to make curtains are much but simple to observe and understand.
Step #1: Measurement curtain height
You will use your tape and measure the curtain’s height, starting from the rod location for the curtains. You have the choice to make if the curtain would touch the floor or in the middle. As you measure to your desired point, you then measure your curtain’s width, which should correspond to that of the rod.
Step #2: Measure Curtain Width
Furthermore, you measure and double the width measurement. For instance, if the width is 32 inches wide, you go to 64 inches for two panels, then you also add 1 inch for the seam allowance and add 6 inches for the length allowance.
If the length is 68 inches, you would need two 34 by 90 inches panels of the fabric. Most curtain fabric comes in 36-inch wide panels, and when you divide this by 180, it will amount to 5 yards.
How do you Measure Fabric for Curtains?
How many yards of fabric to make curtains tells more about how to measure fabric for curtains. The first is to get the required length of the curtain rod and then take some inches of the fabric above the window as you consider the extra fabric.
After this, you measure the width via the rod. As curtain fabrics come in different widths, it allows you to plan sewing better.
You must add an extra seam or hem to provide an allowance. 1 to 8 inches could go for the allowance based on the curtain’s desired style, and with all these explanations, getting the required fabric for curtains would be difficult.
How Much Fabric for Curtains With Pinch Pleat do I Need?
Here, you are only concerned about the width because the measurement for the length is already standard.
After measuring the width, you add 12 inches to serve as the panel overlap at the center of the window, and once you have the sum, you multiply it by 2.25, so the sum will be the amount of the width needed for the pinch pleat curtains in rooms.
Finally, you divide the gotten sum by the number of inches of fabric you desire to use for the curtain. Therefore, if the width is 60 inches, you divide the sum by 60 and round up. What you eventually get is multiplied by the curtain’s length whereas that total would be divided by 36 to get the sum of the yardage required.
Do I Need Extra Fabric for Curtains?
How many yards of fabric to make curtains explained earlier would let you understand that there are allowances made in fabric. But if one could get enough fabric required to make curtains, there is a need to use it.
This extra material goes on the hem and topper facings of the curtain. You stitch it under to keep it out of sight and make it smooth and neat. Where to put extra fabric is measured out, and there are no rules to map out how much you would need, only ensure to have enough as you can cut the excess.
How do I Make Fabric for rod Pocket Curtains?
In this, you take the already finished width and multiply the fullness by about 2. For instance, if you have 100 inches, you multiply it by two, giving you 200 inches. Then, you add the measurement for the returns, which could be 31/2 inches to represent each side and giving a total of 207 inches.
Furthermore, you add in 4 inches per side for a double-fold hem, resulting in 215 inches total. Then, divide this by the fabric width. You will have 36 to 60 inches, of which in this case you would see 54, which equals about 3.98, and approximately 4.
Next, you get your length measurement, which is 85 inches, then add about 8 inches for hems that give about 93 total inches for the curtain’s length.
Add 21/2 inches for the casing and the heading, which will now give you 95 and a half-inch length, and to finally get the yardage, you multiply 95 1/2 by 4 to now get 382 then, you divide by 36, and your total yardage to be needed is 10.61 or approximately 11.
Conclusion
One of the essences of having a lot of this calculation to know how many yards of fabric to make curtains is that it will spare you some materials that you would waste using fabric to make curtains. The amount of fabric needed to make curtains depends on your window’s length and width, which is measured to be exact with the curtain rod.