How Does A Water Damaged Car Sound Like (Plus Repair Guide)

Say you have an old car that is left outside now you want to know how does a water damaged car sound like. A car left outside can easily be damaged by water and may be in danger of a short circuit that can risk the life of the innocent.

Cars are not that vulnerable to water but if the insides of it got wet it sure can make a big problem for you as an owner. If the cars get water damage it has the potential to not start and just be a big piece of metal inside your garage.

how does a water damaged car sound like

To know more information on what a car sounds when it gets damaged by water, continue to read through this article for our guidance.


How The Car Sounds Like If It Has Water Damage

You can find the difference in sound when a car has been damaged by water when the sound it makes when you start is a very fast cranking sound rather than the usual whirring sound. Due to this difference in sound, you can easily know what state your car is in just by starting it.

Usually, a water-damaged car cannot start at all, and you would have trouble starting it if you can find a way to start it. A water-damaged car usually starts for a brief moment and then shuts down again.


How To Know If Your Car Is Damaged By Water

If you are looking for signs on how to know if the car has water damage, you first need to check the odor of the vehicle. If you smell something that is pungent, there could be mold living inside the car, if there is any, there is a big chance that it has been damaged by water beforehand.

Another thing to look into is the headlights and taillights if it is foggy, there is a significant chance that it has been damaged by water.

If you ever have problems with cars getting wet, you can apply for motor insurance for it. If you do not know how to do it, here is our how to claim motor insurance when vehicle is water damaged guide.


How To Fix Water Damaged Car

In this part of the article, we will give you easy steps you can follow on how to fix a water damaged car.


Step #1. Check oil dipstick

The first thing you need to check out if your car has been damaged by water is to check the oil dipstick of your car. It is for you to find out if the water has sipped through the oils of your car.


Step #2. Release water

If there is any water there, loosen the oil drain plug so that water can leak out. If you do not do this step, the water inside it can further damage your car and may even put your car into permanent unusefulness.


Step #3. Remove your spark plugs

Spark plugs conduct electricity to your vehicle, removing it will assure you that a short circuit of the vehicle will not be possible. You can also change it if necessary so that you can run your car as smoothly as it used to.


Step #4. Change oil

Since you have drained the oil from your car due to it containing water, you now have to replace it. Since the oils of the car are usually changed, this is no hard task to do.

Changing the oil can also lend you to see if there is any more water inside it. You also need to change the filter along with the oil.


Step #5. Start the engine

Yes, you have read it right, you start off the engine. However do not put the plugs back on, just crank up the engine and see if there is any water in there. 

Starting the engine while the plugs are out is a safety precaution so that a short circuit cannot happen.


Step #6. Spray oil

If there is any water on the engine, spray some oil in the cylinders and start the engine once again. Repeat this process until there is no more water coming out from the engine.

Once all the water is gone, you can now go on to the next step.


Step #7. Replace the spark plugs

Spark plugs are essential for starting a vehicle, if it is damaged the vehicle would have trouble starting up. Since the spark plugs conduct electricity it’s safe to replace it after being damaged by water.

After you have replaced the spark plugs you can now try again to start the car.


Step #8. Let it run

Once the car is started, let the engine run for a few minutes. Making it run for a few minutes will help warm up the engine and may evaporate the water inside due to the heat.

After letting it sit for a few minutes, turn it off now and check the oil again if there is any water left.


Step #9. Change oil again

If the oil is milky or cloudy, you need to change the oil and filter again. It is to assure the safety of your car and to make it run like it used to.


Step #10. Clear the water in the gas tank

For the last step, you need to clear the water in the gas tank to prevent water from going into the fuel system of the car and causing further damage to it.



After finishing this article, you now have knowledge on solving your problem with regard on how does a water damaged car sound like and how you can fix it. We wish you all the best in solving our problems with your car.

Leave a Comment