You can use white vinegar or a bleach solution. That is the best answer to the question, “how do I clean black mold in shower silicone”.
Mold can be an irritating problem, and it’s common in places that get a lot of moisture. Bathrooms and kitchens are the usual victims of this disgusting problem.
Can Mold Be Harmful?
This fungus grows when black mold spores settle in the moist areas of your home. The spores can spread quickly in the right conditions.
The black color is the first thing you notice about mold. It makes your otherwise pristine white tiles look dirty and damaged.
However, did you know mold can also be dangerous for your health? These fungi release toxins in the air when they are left for too long.
These toxins can be harmful when inhaled, especially for children. Your little one could develop asthma or other respiratory conditions.
Black mold may have mycotoxins which cause mold poisoning. Weak immune systems are at risk of this illness.
Step-By-Step Process On Cleaning Black Mold From The Shower
Mold is a pesky blemish you need to remove. It can usually develop in your bathroom, especially near the shower or bathtub.
Plaster walls may be difficult to repair, especially if it’s beside your bathtub. You need to remove the whole sheet to effectively clean the area. Here’s a more detailed guide on how to fix water damaged plaster walls in the bathroom.
Shower silicone is a more straightforward job. All you need are the cleaning materials which you have stocked at home!
Method #1. White vinegar and toilet paper
White vinegar is the simplest and greenest cleaning agent you can use. You can use it with toilet paper so your liquid can reach the crevices.
Step #1. Get your materials ready
You don’t need much for slight mold growth. You just need:
- Distilled white vinegar
- Toilet paper
- Spray bottle
- Gloves to protect your hands
Step #2. Apply the toilet paper
Roll up your paper and apply it to all the parts where there’s mold. Try to reach all the tight corners, so the fungus doesn’t grow back.
Step #3. Spray the area with vinegar
Spray the toilet paper with your distilled vinegar. Make sure it’s completely soaked, and leave it on for a few hours. Use your gloves while doing this cleaning.
Step #4. Remove the toilet paper
After waiting, wipe everything away, and your shower silicone should be good as new.
Method #2. Bleach solution
Sometimes, the mold is too much for vinegar to handle; this is when you need your bleach!
Step #1. Get your materials ready
You will need more things for heavy damage. Luckily, you can just find them around the house!
- Bleach
- Baking soda
- Plastic Wrap
- Paintbrush
- A face mask and gloves for protection
Step #2. Make the bleach solution
Combine the bleach and baking soda in a plastic bowl until it becomes a paste.
Step #3. Apply the bleach to the area
Use the paintbrush to apply the solution to the mold. Put a thick layer that covers all the crevices. Make sure you’re using gloves and a face mask when doing this.
Step #4. Cover the paste with a plastic wrap
This wrap will allow the paste to completely kill the mold. Leave it for about 15 minutes.
Step #5. Rinse off the solution
Remove the plastic, then pour water over your paste. Your shower should be squeaky-clean once again.
Signs Of Severe Mold Damage
Sometimes, even bleach isn’t enough to clean the mold; this happens when things are dire. It’s essential to recognize when your infestation is severe so you can call the professionals.
1. Respiratory issues
Remember that black mold can cause trouble in your lungs. If your breathing starts becoming weaker, then you have a severe mold issue.
2. Plumbing issues
If you start seeing random puddles, then that means your moisture problem could be from inside your walls.
3. Mold in other parts of the house
If you see mold develop in areas near your bathroom, then that means the fungus isn’t just on the silicon. Most likely, the spores have started growing from inside your walls.
How To Prevent Mold From Developing
Mold can be a serious problem, and that’s why it’s always better to prevent it. This fungus won’t just damage your shower or bath area, but even the other parts of your bathroom.
To avoid these issues, you could also learn how to remove mold from inside walls. Other than that, these are some preventive measures to help keep your bathroom mold-free!
1. Use an exhaust fan
Use this fan while you are showering and leave it on for 10 minutes after. The exhaust will remove the unnecessary moisture in your bathroom.
2. Dry the water after a bath
The exhaust fan isn’t enough to dry a wet shower area, so you must also wipe the silicon after having a shower.
3. Use a dehumidifier
This gadget can also rid your bathroom of unwanted moisture.
4. Spray some vinegar
Daily application of distilled vinegar can prevent the mold from growing in the first place. Remember to let it sit before you wipe it off.
Conclusion
Mold can bring you nothing but trouble, especially in the shower. It looks dirty, and it’s horrible for your health.
Naturally, you sometimes think to yourself, “how do I clean black mold in shower silicone?” The good news is it’s a relatively easy job!
It doesn’t take up much time, and you need minimal materials. Just always remember to keep safe and ask the help of professionals when the damage is severe.