How Big Of A Tankless Water Heater Do I Need?  4 Easy Things To Consider!

Are you wondering how big of a tankless water heater do I need? Stop wondering and start reading this article. Gallons Per Minute (GPS) is the unit of measurement for tankless water heaters.

The tankless water heater with a capacity of seven gallons of hot heated water per minute must be considered for a household of four. At peak hours, the average family uses roughly 6.5 GPM. You’ll have to understand how often appliances the family will be using at the same time to select the portable water heater size. 

how big of a tankless water heater do i need

The tankless water heater with a 4 GPM capacity can serve one bath or device concurrently. The capacity of a tankless water heater was critical for both initial implementation and ongoing expenditures. The tankless water heater that is insufficient will not be able to get enough hot water for the household. Well, this is just an overview; you should keep reading to know the exact size of the tankless water heater for your home.


Things To Consider For Tankless Water Heater Size

Consider the following factors if you want to put tankless units but aren’t sure what capacity to choose. These factors help you find the best size of tankless water heater that fulfills your needs, and you will quickly learn how big of a tankless water heater do I need.


#1. The dimensions of the residence

The dimension of a tankless water heater varies. Almost everything contemporary water heaters, on the other hand, can steam the whole home’s supply of water. Choosing cheaper models can be ineffective since you may only be able to heat the water which goes into a few of the home’s toilets. Unlike traditional holding tank heaters, which can only hold or heat the quantity of water you anticipate using, tankless heaters may warm as much water as you may flow. One must not pick a size that produces less warm water than is required to fill all toilets.


#2. The water flow rate in the home

That feature allows you to operate many taps or showers simultaneously without the tap slowing down. If one shower’s regular flow rate is 1.8 GPM, the second shower can begin to work at 1.8 GPM alongside the first one. When both showers were linked to tankless water heaters, then flow rates must be sufficient for both showers. By summing the flow rates of the two showers, the needed, tankless heater flow rate may be computed. 

Take note that 3.6 GPM = one shower takes1.8 GPM; add the second shower 1.8 GPM; this is the flow rate that a tankless water heater needs. Additional faucets or taps inside the kitchens or another toilet may be operating simultaneously as those two showers, raising the required flow rate by the aggregate flow rate of the other warm water pipes or faucets.


#3. Rise in temperature

After you’ve estimated the flow rate of each tap in the home, you’ll have to figure out how much heat the heater requires to provide to keep the water outlets warm. To estimate the needed temperature rise, we’ll evaluate the water temperature entering the house and the water temperature you wish to come from the faucet. Suppose the home’s inbound water supply temp is 42°F, and the shower (attached to the tankless heater) is set to arrive water at 102°F; the needed temperature increase is 60°F. 

The heater should warm 1.8 gallons of water at about 60 degrees Fahrenheit per minute to reach the appropriate temperature. It is also important to note that typical surface temperatures in various US states may vary because certain conditions usually are hotter or colder than the others. Temperatures in some areas are expected to reach 72 degrees, whereas others get 3 degrees. Understanding the country’s water temperature might help you figure out how difficult the heater may have to work.


#4. Selecting the right tankless water heater

Suppliers of tankless water heaters provide calculating tables and online calculators to assist you in selecting a model based upon maximum heated water demand or temperature rise in the location. For just a 60-degree temperature spike in our area, the residence may have an entire warm water requirement of 6 GPM. 

This might lead you to a couple of models that match the bill. However, if the temperature rises above 40 degrees, the supplier may propose other models. If a temperature increases at the same pace as the use rate, you’ll have to look at various tankless heater types. The most excellent quantity of hot water that a house can need is the peak heated water requirement. It’s not meant to become a reasonable estimate; rather, it’s intended to ensure that the water heater can handle potential peak demand. You may also be interested to know about the most common problems with tankless water heater.


It’s A Wrap!

We hope you have learned well about how big of a tankless water heater do i need. Tankless water heaters are also called on-demand water heater that gives you water whenever you demand it. The tankless water heater comes in different sizes, and you just consider the factors mentioned above when buying a tankless water heater. Thank you, friends, for staying with us. You may also want to read about how much is a tankless water heater and why does my tankless water heater go cold.

Leave a Comment