The Easiest Way to Disassemble a Chicco Bravo Stroller

This blog post will provide detailed instructions on how to disassemble a Chicco Bravo stroller so that you can either clean or store the pieces while keeping them safe!

Many new parents are unaware of and how to disassemble a Chicco Bravo stroller, but this blog post will teach you just that. The Bravo is a lightweight, compact stroller perfect for families on the go.

disassemble a Chicco Bravo stroller

It has some amazing features like a one-hand fold and multi-position recline seat with leg rest, which make it easy to transport from place to place. But if you want to clean or store your child’s stroller when not in use, then taking it apart can be quite challenging without instructions.

 

Steps on how to Disassemble a Chicco Bravo Stroller

Step 1. Open the stroller and remove one side of the seat. Remove any padding from this section, as well as any other accessories that are connected to it such as a canopy or cup holders.

Step 2. Next, use your hands to pull back on the black cover of each wheel until they pop out with some resistance. Make sure not to touch anything but the wheels themselves while doing so!

Step 3. Once all four wheels have been removed successfully, flip over the seat flap to get at its underside where you will find two small clamps that hold down fabric flaps for access into both sides of the frame – take these off by squeezing them together then prying them apart like a door hanger (they’ll come off with some force)

Step 4. Next, take out the four screws that are holding down the stroller’s two armbars – they will be found by following where the fabric flaps are attached to each side of the frame.

Step 5. Loosen these screws just enough so you can remove them entirely without undoing any stitches or damaging anything inside. Once all four screws have been removed successfully, flip over both sides of your Bravo and pull up on it while simultaneously pulling back from underneath to take apart its armbar joints — make sure not to use excessive pressure!

Step 6. The last step is removing a couple more things: firstly, detach any additional accessories including water bottles and cupholders; then carefully turn the Bravo so you can take out the leg bar joints.

 

How do you Clean a Chicco Bravo Stroller?

There are two ways to clean your Chicco Bravo stroller, depending on the level of dirt and grime that needs removal.

One way is to use a vacuum cleaner attachment with an extended hose or brush head; hold it over top of each surface you want to clean and press down before moving onto another spot.

The other option is using a damp cloth for wiping off any surface that just requires dusting. You can also wipe down the inside carpets if necessary — be sure not to spray anything directly into them as this might cause some damage!

Instructions on Cleaning

Step 1. The first step in cleaning your Bravo would involve removing all accessories like water bottles and cupholders, then turning the stroller so you can access the back of it.

Start by removing any fabric pieces like seatbacks, headrests, and footrests. A clothes hanger can be helpful to hang them up when you’re finished so they don’t get in your way while cleaning.

Step 2. Next, remove all plastic or rubber parts on the stroller: trays for food and drinks, cupholders (if applicable), wheels, metal axle rods at the bottom of both sides where the baby’s feet go through when pushed from side-to-side or front-and-back. You should now have a much cleaner Chicco Bravo!

The next step is either wiping down with a damp cloth if just dusting, or washing with soap and water if there are food spills. Once the stroller is clean, it’s time to reassemble.

Put in any fabric pieces like seatbacks, headrests, and footrests.

Step 3. Next add all of the plastic parts: trays for food and drinks, cupholders (if applicable), wheels, metal axle rods at the bottom of both sides where the baby’s feet go through when pushed from the side-to-side or front-and-back.

Step 4. Lastly, attach anything that was detached before such as handles on each side of the handlebar piece; also hook up any accessories that may have been removed such as a car seat adapter, infant car seat.

 

How do I Remove the Cover From my Chicco Nextfit zip?

The next time you remove the cover from your Chicco Nextfit zip, follow these steps to make it easier:

Step 1. Loosen all of the straps so that they are not tight.

Step 2. Slide one side of the safety buckle over each shoulder strap and then pull them apart and bring them around behind your back. When done correctly, both of the sides should be at about waist level and have a long tail on either end for pulling up as shown in this video tutorial.

Step 3. Twist those loops together once or twice–just enough to keep everything out of your way while working with it but still not too tightly!- Reach under the baby’s bottom and grab an edge which will take some practice.

Pull the loops up and over your arms so that baby is facing out. Lift both of his or her legs to undo them from the folded position shown here:

Bring one leg back down, then the other–now you can bring everything together! Tuck in any dangling straps, attach seat liner if it comes off with stroller pieces and snap safety belt into place on baby’s waist (again). If necessary, use this video tutorial for more assistance.

Leave a Comment