A Quick Guide to Putting Together a Spring Haven Swivel Motion Chair

Spring Haven Swivel Motion Chair Review: The Spring Haven Swivel Motion Chair is a great choice for anyone who wants to rock in comfort.

It has a padded seat and back, which offer support. You can adjust how high or low you want the chair to go. This guide will show how to put together this sturdy motion chair so that it’s ready for use!

How to Vacuum Spring Haven Swivel Motion Chair

Step 1. Ensure that the swivel motion chair is plugged in and turned on. – Adjust how high or low you want your chair to go by pressing down on the lever with your foot, then release it when you are finished. – Pull up from underneath the base until the wheels click into place at the desired height for vacuuming.

Step 2. The vacuum should be set up directly under where one of these wheels would be located if they were not raised off of ground level (approximately 12 inches). You may need to experiment with how high this needs to be based on how deeply fabric has been pulled onto the frame as well as how long the rug/carpet extends over-frame circumference around the wheel area.

Step 3. Make sure that the height of the vacuum is set to how high your chair will need to be raised for it to not touch any part of the rug/carpet.

Step 4. If you are vacuuming an area with a very deep pile, lower one wheel down and adjust how high the other two wheels are by using the lever on the left side of the base (in front). Lower both back wheels at the same time if you’re going over rugs or carpets that have fabric pulled taut across frame circumference before lowering either front wheel.

Step 5. To raise from floor level, use the handle underneath the handgrip, as well as the foot release button on the right side – this can take some effort so don’t forget!

How to Lubricate Spring Haven Swivel Motion Chair

Step 1. Remove the wheels from each chair and just spray them with WD40 or some other lubricant.

Step 2. Replace wheel axles into place and reattach rubber casters on either side of the base in front, making sure they are properly seated against their respective axle slots.

Step 3. Once you have done this for all four chairs, turn each one over to expose its underside (the same goes if it’s already upside down) and spray a coat of aerosol lubricants into the spaces between frame crossbars as well as the space underneath where metal footrests slide around – don’t forget corners! Finally, go through each joint area again to make doubly sure there is sufficient oil applied.

Step 4. Allow an hour for the oil to set in. Place the chairs back where they were and you’re done!

How to Care for Spring Haven Motion Chair:

It’s important to clean your Spring Haven Swivel Motion Chair every few months. It’s easy, you just need a damp cloth and some mild soap!

Aftercare: After cleaning the chair, make sure to dry it off with a towel or let it air dry before storing it. Remember that this product is not self-assembled and requires a little work.

How to Prevent Wear and Tear on your spring Haven Swivel Motion Chair

Prevention is a great way to care for your furniture. Regularly wiping down or vacuuming the chair will help keep dirt and dust off of it, which can cause wear and tear over time.

Features of Spring Haven Swivel Motion Chair

  • Padded seat and back for support, -Adjust how high or low you want the chair to go.
  • Sturdy, durable construction
  • Item weight is 18 pounds
  • Item dimensions are 43.25″ x 28.75″ x 25″.
  • Comes in a variety of colors to choose from.

Spring Haven Swivel Motion Chair Product Description

The Spring Haven Swivel Motion Chair is the perfect choice for anyone who wants comfort, and how high or low they want their chair to be! With its padded seat and back, adjustable height settings, sturdy construction that weighs 18 pounds with dimensions of 43.25”x28.75”x25’ you can’t go wrong! It comes in several different colour choices so that it matches your home’s decor perfectly!

Steps on Assembling a Spring Haven Swivel Motion Chair

Step 1. Attach the back of the chair to the bottom with a screwdriver.

Step 2. Strap on arms by attaching them at both ends and then fastening them to the armrests with screws.

Step 3. Place cushions in between the seat, which is already attached to frame parts and place them over top of a base that holds up armrests.

Step 4. Attach the seat to the frame by pushing the end of the chair down and then fastening it appropriately with screws, which are provided in the kit. Place back piece on top so that the pieces line up properly and fasten together with screws from the kit as well!

The spring haven swivel motion chair is now ready for use! Enjoy rocking comfortably, knowing how to put this sturdy home furniture item together correctly.

Advantages of Owning a Spring Haven Swivel Motion Chair

  • It’s an easy to assemble home furniture item
  • The seat is comfortable, yet durable fabric or leather material
  • Enjoy rocking in the chair comfortably because of how sturdy it is!

Disadvantages of Owning a Spring Haven Swivel Motion Chair

This product may not be ideal for people who have had back injuries. The spring haven swivel motion chair will cause their pain to worsen and they should consider purchasing another type of home furnishing altogether.

It might also make individuals feel dizzy from how much the rotates. This product would best suit those without any previous injury history and who are looking for something that can facilitate great relaxation time at home.

Leave a Comment